Manitoba Water & Wastewater Association upcoming events

Water Distribution 3-4 (01 Jun 2026)

Mon, 01 Jun 2026 15:00:00 GMT

Virtual Classroom - Instructor Led

This course will be presented by our training partner BCWWA

June 1 - 5, 2026 (5 Days) 10:00 am – 6:00 pm Daily (CST)

CEU Credits: 3.0

Class Format

Virtual classes are offered in real time with a live instructor. When you are part of a virtual class, your instructor is able to provide the interactive classroom experience from your own computer. You can participate in discussions, test your knowledge and ask questions, just like in a regular classroom. These classes run similarly to a live class and are a great option for those people interested in completing their training in a typical timeframe.

Learning Objectives

After completing this course, you will be able to:

Understand and apply water distribution system information/components including how to assess system demand, distribution systems, hydraulics, system layouts and maps, perform pressure readings, prepare contingency plans and read blueprints, readings and maps;
Monitor, evaluate, and adjust disinfection in water distribution systems and inspect and evaluate source water for contamination;
Understand the functions of a variety of equipment, and how to operate and perform maintenance on equipment including pumps, chlorinators, engines, generators, hand tools, etc.; and
Understand how to perform security, safety and administrative procedures including administering a safety/compliance program, conducting cross connection surveys, developing and maintaining a sample site plan and preparing regulatory reports.

Who Should Attend

You should take this course if you:

Wanting to advance your understanding or move into a level 3/4 operator role; or

An operator preparing to write a certification exam.

All attendees must have their own computer with audio and video capabilities to participate.

Contact the MWWA office for any questions related to registration for this event.

Water Loss Management (03 Jun 2026)

Wed, 03 Jun 2026 13:00:00 GMT

In Person Classroom - Instructor Led

This course will be presented by Hetek and MWWA

June 3, 2026 8:00 am – 4:00 pm. (CDT)

CEU Credits: 0.6

The Water Loss Management course outlines a theoretical and practical understanding of a water loss strategy for utility drinking water operators.

In this course from Hetek you will learn:

Water loss management strategy
Water balance worksheet (AWWA M36 standard)
Flow and pressure monitoring as a broad system approach
Pre-project planning towards a water leak survey
Water leak detection technologies
Analysis of data from water leak detection instruments
Operation of water leak detection instruments in the field

Upon completion of this course and a passing grade of 80% on the test at the end the participant will receive 0.6 CEU's

Lunch will be provided

Wastewater Collection System Odor and Corrosion Control (08 Jun 2026)

Mon, 08 Jun 2026 15:00:00 GMT

VIrtual Classroom - Instructor led

This course will be presented by our training partner BCWWA

June 8, 2026 10:00 am – 6:00 pm. (CDT)

CEU Credits: 0.6

Class Format

Learning Objectives

After completing this course, you will be able to:

Describe the conditions where odor and corrosion can occur in a wastewater collection system.
Analyze and determine corrective strategies to minimize or eliminate odors generate within a wastewater collection system;
Assess levels of corrosion within the wastewater collection system;
Perform the necessary procedures to control/minimize/eliminate odor and/or corrosion problems within wastewater lift stations.

Who Should Attend

You should take this course if you:

are responsible for maintenance of water and wastewater utility systems including plant operations;

are supervisors & managers of utility systems.

are responsible for pump stations and related infrastructure;

All attendees must have their own computer with audio and video capabilities to participate.

Contact the MWWA office for any questions related to registration for this event.

Watermain Disinfection for the Field Operator (09 Jun 2026)

Tue, 09 Jun 2026 15:00:00 GMT

Virtual Classroom - Instructor Led

June 9-10, 2025 10:00 AM – 6:00 PM (CDT) both days

CEU Credits: 1.2

Class Format

Learning Objectives

After completing this course, you will be able to:

Better understand why we disinfect: A history of mortality rates, life expectancy and population before sanitized water
Recognize the advent of sanitary water supply and the significance to society
Differentiate between various waterborne disease with an overview of the 4 major categories of transmission and a description of waterborne bacterial pathogens, viruses, and protozoan parasites
Understand disinfection types used in the water industry and their applications
Outline regulatory agencies Drinking water protection act relevant sections –
- BC Health and Relevancy to the field worker and;
- Standards agency AWWA, NSF, CSA
Differentiate between various methods of disinfecting pipelines and reservoirs including:
- Disinfection overview and pre flush
- Tablet method
- Slug method
- Continuous feed method
- Equipment, Venturi, chemical feed pump, premix liquid flushing methods
- Pressure testing
Perform practical calculations such as: - Volume, velocity, and flow rate applications, chemical feed rates and concentration and flow rate calculations
Comprehend the verification process and dechlorination techniques.

Who Should Attend

You should take this course if you:

Operator or field supervisor of water utilities systems of any size or setting.

All attendees must have their own computer with audio and video capabilities to participate.

Contact the MWWA office for any questions related to registration for this event.

Preventing Waterborne Illness (12 Jun 2026)

Fri, 12 Jun 2026 15:00:00 GMT

Virtual Classroom - Instructor Led

This course will be presented by our training partner BCWWA

June 12, 2026 10:00 am – 6:00 pm. (CST)

CEU Credits: 0.6

Class Format

Learning Objectives

After completing this course, you will be able to:

Understand the responsibility of operators in delivering safe drinking water.
Recognize pathogen risks.
Treat hazards with treatment technologies.
Plan for emergencies and unexpected events.

Who Should Attend

You should take this course if you:

Operate, maintain, manage, or test the water in a water treatment or water distribution system; or
Require continuing education units (CEUs) to maintain your Operators Certificate

All attendees must have their own computer with audio and video capabilities to participate.

Contact the MWWA office for any questions related to registration for this event.

Wastewater Treatment 3/4 - Virtual Classroom (15 Jun 2026)

Mon, 15 Jun 2026 15:00:00 GMT

Virtual Classroom - Instructor Led

This course will be presented by our training partner BCWWA

June 15 - 19, 2026 (5 Days) 10:00 am – 6:00 pm Daily (CST)

CEU Credits: 3.0

Class Format

Virtual classes are offered in real-time with a live instructor. When you are part of a virtual class, your instructor is able to provide the interactive classroom experience from your own computer. You can participate in discussions, test your knowledge and ask questions, just like in a regular classroom. These classes run similarly to a live class and are a great option for those people interested in completing their training in a typical timeframe.

Learning Objectives

After completing this course, you will be able to:

Understand the concepts behind the various operational strategies employed in lagoon treatment systems
Review and understand the principles behind the design and operation of fixed growth processes.
Understand the operating concepts behind the most common suspended growth processes
Describe the processes available to improve effluent quality beyond that which is achievable by conventional treatment processes
Be familiar with the processes used to thicken, dewater and ultimately stabilize primary and secondary sludge.
Identify the need for disinfection of effluent before it is returned to the environment and the methods available to achieve that go.

Who Should Attend

You should take this course if you:

You should take this course if you:

are involved in the operation of a wastewater treatment plant

are involved in the supervision of wastewater treatment facilities.

wish to prepare for Manitoba levels 3 and 4 certifications

All attendees must have their own computer with audio and video capabilities to participate.

Contact the MWWA office for any questions related to registration for this event.

Membrane Basics Webinar (17 Jun 2026)

Wed, 17 Jun 2026 18:30:00 GMT

Virtual Classroom - Instructor Led

June 17, 2026 1:30 pm – 2:30 pm. (CST)

CEU Credits: TBD

Class Format

Learning Objectives

This Webinar will provide a practical introduction to membrane filtration technologies, including reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF), and membrane bioreactors (MBR). The session will cover fundamental separation mechanisms, key performance characteristics, and how these systems differ in application and operation. Attendees will gain a clear understanding of membrane configurations, products, and real-world use cases, concluding with a brief overview of Toray’s membrane portfolio.

Who Should Attend

You should take this course if you:

Operate, maintain, manage a water or wastewater facility that uses membranes or will be using membranes in the future.
Require continuing education units (CEUs) to maintain your Operators Certificate

About the Presenter

Elke Peirtsegaele is a Regional Sales Manager for Toray, covering the Western United States and Canada as well as the Gulf Coast Region. She has over 12 years of experience in the membrane industry, with deep expertise in reverse osmosis, nanofiltration, and ultrafiltration technologies. Elke has held various technical and commercial roles and uses her expertise and passion to help customers find solutions for their water treatment needs.

All attendees must have their own computer with audio and video capabilities to participate.

Contact the MWWA office for any questions related to registration for this event.

Ultraviolet Disinfection (19 Jun 2026)

Fri, 19 Jun 2026 15:00:00 GMT

Virtual Classroom - Instructor Led

This course will be presented by our training partner BCWWA

June 19, 2026 10:00 am – 6:00 pm. (CDT)

CEU Credits: 0.6

Class Format

Learning Objectives

After completing this course, you will be able to:

Understand how and why ultraviolet (UV) light is used to disinfect water, including how UV works and how it compares to other treatment processes.
Understand and evaluate UV equipment, and the factors that affect UV dosage.
Apply your knowledge in an operating environment to monitor and maintain equipment.

Who Should Attend

You should take this course if you:

Are responsible for evaluating the application of UV technology for a water or wastewater system; or
Require continuing education units (CEUs) to maintain your Operator Certification.

All attendees must have their own computer with audio and video capabilities to participate.

Contact the MWWA office for any questions related to registration for this event.

Hydrant and Valve Instillation (23 Jun 2026)

Tue, 23 Jun 2026 13:00:00 GMT

In Person On Site - Instructor Led

This course will be presented by Deblo and the City of Selkirk

June 23, 2026 8:00 am – 6:00 pm. (CDT)

CEU Credits: 0.7

Elevate your skills and gain real-world experience along with MWWA and Deblo with this comprehensive Valve, and Hydrant Installation Course. Designed for both new and experienced professionals in the water utility field, this course provides practical, job-ready knowledge aligned with AWWA standards and industry best practices. Arrive at 8:00 at 405 McLean Ave. Selkirk WTP for Safety meeting then we will walk over to the dig site. Lunch will be served on site.

What You’ll Learn:

✅ Pipe Installation & Measurement
Develop precision skills using tape measures and cutting techniques to ensure accurate, efficient pipe installation.
✅ Valve & Hydrant Installation
Get hands-on experience installing hydrants within municipal distribution systems.
✅ Materials & Components
Explore various pipe materials, coupling types, and mechanical restraint systems used in today’s infrastructure.
✅ Water Main Disinfection & Flushing
Learn proper chlorine disinfection procedures and safe flushing techniques to maintain water quality.
✅ Regulatory Compliance
Understand key regulatory requirements and operational standards for municipal water systems.
✅ New Technology
Learn about leak detection technology that can be installed on hydrants today.

Why Choose This Training?

Practical, field-based instruction
Industry-standard tools and techniques
Aligned with AWWA guidelines
Ideal for utility workers, contractors, and public works staff

Required PPE:

Hardhat
Steel toe boots
High vis clothing

Build confidence. Gain expertise. Advance your career in water utilities.

0.7 CEU's for this course

Hydrant and Valve Maintenance (01 Sep 2026)

Tue, 01 Sep 2026 13:00:00 GMT

In-person Training

September 1, 2026 8:00 am to 4:00 pm

Location: 545 Conservation Dr, Brandon, MB - River Bank Discovery Center

CEU Credits: 0.6

Learning Objectives

This course will go over AWWA gate valves design, operation, maintenance and troubleshooting. We will also introduce the three types of hydrant designs and show the common makes, models and parts of hydrants in western Canada to help identify what may be in a distribution system already. Then we will focus on establishing a proper hydrant and valve maintenance program.

Agenda

Proper Valve box Installation
AWWA Gate Valve Design, Operation and Maintenance
AWWA Fire Hydrant Design, Operation and Maintenance
Establishing a proper maintenance program and Workshop instructions
Workshop in the field working on hydrants, taking them apart, discussing the repairs needed and reassembling the hydrants. Each hydrant will be operated upon completion

Instructor: Jordan Webb, Mueller Canada

Jordan Webb is the Territory Manager for Mueller in the Saskatchewan, Manitoba, and Northwestern Ontario regions. In his position with Mueller, he is constantly being trained on the latest procedures for product installation, maintenance, and safety. Currently he is a member of the SWWA, MWWA and NWOWWC associations and has conducted multiple training sessions with each. He brings with him 15 years of training experience.

All participants are required to have proper PPE for working on a hydrant.

Hard Hat
Steel toed footwear
High vis vest, shirt or jacket
gloves are recommended

Be prepared to tear down and reassemble hydrants and valves as part of the training.

Lunch, refreshments and course materials are included in the registration costs.

Hydrant and Valve Maintenance (03 Sep 2026)

Thu, 03 Sep 2026 13:30:00 GMT

In-person Training

September 3, 2026 8:30 am to 4:30 pm

Location: 477 Main Street Steinbach, MB - Steinbach Fire Hall

CEU Credits: 0.6

Learning Objectives

Agenda

Proper Valve box Installation
AWWA Gate Valve Design, Operation and Maintenance
AWWA Fire Hydrant Design, Operation and Maintenance
Establishing a proper maintenance program and Workshop instructions
Workshop in the field working on hydrants, taking them apart, discussing the repairs needed and reassembling the hydrants. Each hydrant will be operated upon completion

Instructor: Jordan Webb, Mueller Canada

All participants are required to have proper PPE for working on a hydrant.

Hard Hat
Steel toed footwear
High vis vest, shirt or jacket
gloves are recommended

Be prepared to tear down and reassemble hydrants and valves as part of the training.